Параметры регулировки угла развала и схождения колес

Camber (1)
Front ............................ - 0.5 ......... -1.5 To 0.5
Rear ............................. - 0.5 ....... -1.25 To 0.25
Caster (1)
Front ............................ 1.88 .......... .88 To 2.88
Toe-In (1)
Front .............................. 0 ........... -.16 To .16
Toe-In (2)
Front .............................. 0 ........... -.08 To .08
Toe-Out On Turns (1)
Inner ............................ 38.13 ................. N/A
Outer ............................ 30.32 ................. N/A
Turning Angle (1)
Inward Wheel ..................... 38.13 ................. N/A
Outward Wheel .................... 30.32 ................. N/A

(1) - Measurements are in degrees.
(2) - Measurements are in inches (mm).